Carbtrol Corporation experienced engineers will select from our wide range of carbons and other media for your specific sewage odor problem. Our systems are designed for under 100 CFM to over 13,000 CFM and remove VOCs, sewage, hydrogen sulfide and other odors.
It is very important to choose the correct type of activated carbon when treating hydrogen sulfide (H2S) in air streams. Each application needs to be reviewed for H2S influent concentration, H2S treatment objective, stream composition, other contaminants present such as VOC’s, and estimated carbon usage rate.
Carbtrol offers two different types of carbons for H2S treatment: Type CSV and Type CAT2.
Type CSV Carbon is a standard unmodified granular carbon which is effective for H2S treatment at low concentrations (under 5 ppm) and low flow rates. Type CSV has an H2S removal capacity of 0.024 g H2S/cc carbon or 5% by carbon weight. Type CSV is also very effective in treatment of VOC’s.
Type CAT2 Carbon is a catalytic pelletized carbon which is specifically formulated for H2S removal. Due to its catalytic properties, Type CAT2 Carbon has a much higher removal capacity – 0.20 g H2S/cc carbon or 47% by carbon weight. It is recommended for H2S, especially at concentrations in excess of 5 ppm. In order to achieve the full removal capacity the following conditions must be present: relative humidity of 60% – 90% and a ratio of O2:H2S of 4:1. However, unlike Type CSV Carbon, it is relatively ineffective for treating VOC’s.
Contact us today to review your H2S removal application.