PFAS Removal Filter System

How Can We Help?

This field is for validation purposes and should be left unchanged.

Carbtrol offers a number of solutions for PFAS removal from water using activated carbon and/or PFAS selective ion exchange resin. These systems are available for industrial applications as well as drinking water/potable water applications that require NSF 61 certification. PFAS have recently entered the national spotlight as emerging contaminants with serious adverse impacts on human health. This can occur even at low concentrations in the parts per trillion range.


Perfluorinated and polyfluorinated alkyl substances are a group of over 4,000 manmade chemicals, collectively referred to as PFAS (or PFCs). PFAS are found in everyday items including fast-food wrappers, stain-resistant fabrics, nonstick cookware and firefighting foams.

They are water soluble and therefore can seep into surface soils over time at firefighting training facilities, airports, military bases, manufacturing sites, landfills, etc. From there, PFAS can leach into groundwater or surface water, and can subsequently contaminate drinking water.

Also known as “forever chemicals”, PFAS stay in the environment for a long time and do not break down easily. As a result, PFAS are widely detected in soil, water, air, and food. They can accumulate in the food chain due to exposure when someone uses certain products that contain PFAS, eats PFAS-contaminated food, or drinks PFAS-contaminated water. PFAS can build up in the body when ingested and, over time, can increase to a level where health effects could occur.

PFAS Removal from Water

PFOS / PFOA Treatment System

Depending on your contamination level, water chemistry and application, Carbtrol uses a combination of granulated activated carbon (GAC) and/or ion exchange resin for PFAS removal. This technology follows the EPA guidelines for “Reducing PFAS in Drinking Water with Treatment Technologies.”

Granulated Activated Carbon (GAC) works well on longer-chain PFAS such as PFOA (Perfluorooctanoic Acid) and PFOS (Perfluorooctane Sulfonate). GAC is also used to remove dissolved oils, VOCs, and other dissolved  organic compounds.

In order to achieve the very low (ppt) discharge levels, it is important to remove particulates from the influent stream as well as after the carbon drums.

A typical 6 GPM PFOS/PFOA Removal System (shown) consists of a pre-filter, (2) L-1-CL Drum Filters, a post-filter, and a PK-10 piping kit. This equipment can be mounted on a poly skid for ease of installation and mobility.

Two Stage Treatment Technology

A second technology, Ion Exchange, has also proven effective for PFAS treatment. The ion exchange media, while considerably more expensive than the activated carbon media, has been demonstrated to be cost effective specifically for low molecular weight PFAS compounds. These include PFNA, PFHxA, PFHxS, PFHpA, PFBS, and PFBA.

Carbtrol has recently demonstrated a two stage treatment process which utilizes the strengths of both technologies. A two stage sorption process utilizing activated carbon in the first stage, followed by ion exchange in a second stage treatment. This concept combines the strengths of both technologies. Flow diagram is shown below.

Activated carbon adsorption allows removal of the high molecular weight PFAS compounds at the most cost effective rate. Then, by polishing with Ion exchange, it addresses the low molecular weight compounds and minimizes the use of the more expensive ion exchange media.

Additionally, in most PFAS treatment applications, some level of non-target background organic contamination is present. In the two stage process, the activated carbon is used to address removal of the background material further maximizing the cost efficiency of the polishing treatment step.

These two stage systems are a perfect application for instances when you want to treat whatever PFAS compounds are found in the waste stream. An example is treating IDW – Investigation Derived Waste at Air Force bases, where you may not have a complete breakdown of all the contaminents in  the water.

Contact a Carbtrol Sales Engineer today to review your application in detail!

Two Stage PFAS Treatment System
Two Stage Treatment Skid with Influent Pump
Two Stage Treatment Flow Diagram
    Your Cart
    Your cart is emptyReturn to Shop